Step 1: Run through the pre-assemble checklist and confirm the installation site
To ensure a successful installation on the Scanatic™ 360 Body Scanner, please run through the following checklist and confirm the installation site complies with all the requirements.
Step 2: Self-assemble the Scanatic™ 360 Body Scanner
Please follow the step by step instructions from the following video
Assembly - Putting together the frames
Assembly - Putting on the Computer
Step 3: Activate your Scanatic™ 360 Body Scanner
Go to the Scanatic™ for Fashion website and select Activate my Scanatic™ products.
Follow the on-screen instructions to complete the activation process.
Step 4: Before the Calibration
Step 5: Access calibration software
Before you proceed with calibration, you must first make sure you have access. The Calibration software is restricted and only available to users with either a digital certificate or a Scanatic™ for Fashion account with "Scanner Setup" permission.
Connect to the Calibration software (using a Scanatic™ for Fashion account)
Connect to the Calibration software (using a digital certificate)
Step 6: IR Connectivity Test
The first part of IR Connectivity Test will start with the pillar assignment. Once the pillars have been successfully detected and assigned, it will light up each individual IR sensor (18 in total) for you to confirm they are all functional.
Step 7: Calibration
a) Step 1: NOTHING inside the scanner. This is an often overlooked step.
b) Step 2: place the CalibKit well centered inside the scanner and expand it.
Common issues during calibration
Step 8: Try your first scan
using the Cloudzet Store App on in-store iPad
More resources:
Error Messages and Trouble Shooting
Troubleshooting - How to identify Body scanner status by its WiFi Access point?
Comments
0 comments
Please sign in to leave a comment.