Conduct Calibration - Connect to the Calibration software (with a digital certificate)

Before you proceed with calibration, you must first sure you have the access.  The Calibration software is restricted and only available to users with either a digital certificate or a Scanatic™ for Fashion account with Scanner Setup permission.

If you have a digital certificate, proceed with the followings or visit Calibration - Connect to the Calibration software (with a Scanatic™ for Fashion account)

Turn on the Body Scanner.  Wait for 2-3 minutes for the WIFI to come up.  Search and connect directly to the Scanner’s WIFI with a name that begins with TG3D- (non-activated) or a name you have already configured (activated).  For non-activated scanners, the default WIFI password is 12345678 

NOTE: if you see a WIFI with TG3D -NoNetwork, this is an indicator that the scanner is not connected to the internet and you will need to fix the internet problem before you proceed

Open the browser and go to https://calibkit.tg3ds.com:8443.  For iPhone users: please ONLY use Safari for this operation.

Select the digital certificate you had just installed 

When you see this page, you have successfully entered the calibration software

The following articles are also recommended for you:

Doing the Calibration - IR Connectivity Test

Doing the Calibration - Connect to the Calibration software (with a Scanatic™ for Fashion account)