Calibration - If you have a Scanatic™ for Fashion account with Scanner Setup permission, proceed with the followings. Otherwise, visit Calibration - Connect to the Calibration software (with a digital certificate)
Search and connect directly to the Scanner’s WIFI with a name that begins with TG3D- (non-activated) or a name you have already configured (activated). For non-activated scanners, the default WIFI password is 12345678
NOTE: if you see a WIFI with TG3D -NoNetwork, this means the scanner is not connected to the internet and you will need to fix the internet problem before you proceed
Open the browser and go to https://calibkit.tg3ds.com:8443. For iPhone users: please ONLY use Safari for this operation
Log in with your Scanatic™ for Fashion account (must have Scanner Setup permission on this scanner)
When you see this page, you have successfully entered the calibration software
The following articles are also recommended for you:
Doing the Calibration - IR Connectivity Test
Doing the Calibration - Connect to the Calibration software (with a digital certificate)
Comments
0 comments
Please sign in to leave a comment.